PENERAPAN METODE ANALISIS THEVENIN DAN NORTON PADA APLIKASI NI MULTISIM

Authors

  • Samaria Chrisna HS Politeknik Negeri Medan
  • Sinta Marito Siagian Politeknik Negeri Medan

Keywords:

Current, Voltages, Resistance, Thevenin, Norton, current

Abstract

This study aims to analyze the current and voltage of an electrical circuit theoretically, practically using a circuit kit and use in the NI Multisim application. The method used is Thevenin Norton's theorem method on a circuit. This method is identical to how to change a complex circuit into a simpler one with the stages of determining the circuit first, then proceeding with the determination of Resistance, Voltage and Current gradually. In this study, using a variation of the source voltage of 6V, 9V and 12V, the Thevenin voltage was practically 3.31mA, 5mA, 6.69mA, respectively. Meanwhile, theoretically (simulation) each is 3,356mA, 5,035mA, and 6,712mA. Furthermore, in the practical measurement of voltage values obtained 0.98mV, 1.48mV, 2mV and the simulation values are 1.017mv, 1.628mV, 2.035mV.

Published

2021-08-25